DIY fabric printing tutorial part 1 – Making stamps

diy fabric printingI have finally got back into printing fabric, its only been, oh, 10 years since I completed my degree in printed surface design… A few things got in the way (ahem..) but the urge to print has finally returned! I thought I would share an example of how to make your own stamps. Fabric printing is such fun and the results are pretty instantaneous and so satisfying, and you can achieve great results without the need to buy expensive equipment. But of course it doesn’t have to be limited to fabric, paper is just as satisfying to print onto and great to do with kids too.

For the stamps you will need:

  • blocks of wood, bottles tops, corks or other material to stick your stamps onto (get creative and look in your recycling!)
  • craft foam
  • a pen
  • craft knife and/or scissors
  • strong glue (glue gun or craft glue)
  • cutting board (if using craft knife)

DIY stamps

DSCF1075

Cut out your shapes. For complicated shapes, you can draw your design on paper first, cut it out then trace around it onto your craft foam.

Glue down your shapes.

DSCF1082 DSCF1076

DSCF1079ย Here I used corks and milk bottle tops for smaller shapes

To print your stamps you will need:

  • fabric paint (I used fastex)
  • plate/pallet or similar for mixing colours on
  • sponge or sponge dabber
  • something to mix paints with e.g paintbrush or small spoon
  • for larger quantities of mixed fabric paint you may want to store leftovers in a clean lidded jam jar or tub.
  • masking tape
  • suitable printing surface*

*I will be adding another tutorial on how to create a printing surface. For small scale projects you can just masking tape your fabric to a table, but bear in mind that the ink make sink through to the table.

DSCF1356Mix your desired colour, and dab the ink onto your stamp with your sponge.

DSCF1089DSCF1358Here I tied and elastic band around a sponge to give it a more ’rounded’ area for dabbing with. (please excuse my claw like hand!)

testing the stampsTesting out the stamps on paper or smaller scraps of fabric first is a great idea…! It will save you wasting your chosen fabric as the stamp may print differently to how you imagined and it takes a few goes to get the pressure right. Also it will give you a chance to see if the colour you have chosen is correct.

DIY fabric printingย Here you can see how my fabric tightly stretched onto my printing surface and taped down to keep the fabric from moving as I print.

Have fun! x

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s